Flat Top900 MTW Modular conveyor Belt
system plastic conveyor components
plastic Conveyor belts for sale
straighrt running conveyor belt
Plastic modular belts, plastic chains, conveyor belt, plasitc table top chains
Belt Type: FTDP900MTW
Belt Material: POM/PP
Belt Pitch: 27.2mm
Open area: 0%
Assembling method: Connected with rods
Belt weight: 1.76Kg/M (POM), 1.24Kg/M (PP)
Backflex radius: 50mm
Modular belts are constructed with modules molded from thermoplastic materials connected with soild plastic rods. Except for narrow belts (one complete module or less in width),all are built with the joints between modules staggered with those of adjacent rows in a "bricklayed" fashion. This structure can enhance transverse strength and it is easy for maintain.
The total plastic and cleanable design can solve the steel belts easily polluted.Now the cleanable design makes the belts very suitable for food industry area as well.Also there are be widely used in many other industries,such as container making,pharmaceutical and automotive,lines of battery and so on.
Rellwin company has a widely range of different material and structure belts. The range of Rellwin's modular belts varies from 3/8 inch small pitch straight running belts to 2inch pitch sideflexing belts,The most commonly used belt styles inclued:
Flat Top:suitable for a wide range of products,when a fully closed belt surface is preferred.
Flush Grid:commonly used in applications where drainage or airflow is desired.
Raised Rib:recommended in applications where product stability over transfers is a concern.
Friction Top:commonly employed on incline conveyors, where the elevation of product changes.Friction Top modular belts can be used up to an angle of 20 degrees,depending on the pack style and material.
Roller Top:used in a variety of low-pressure accumulation applications.
Perforated Flat Top:used when air flow and water flow are critical but the percentage of belt open area must remain low.
Other,less frequently used belt styles may better fit your special requirements:Open Grid,Nub Top(anti-stick),Cone Top(extra grip).
Ningbo Rellwin industry Co., Limited is specialized in manufacture
900 Flush Grid plastic modular conveyor belt,900 Raised Rib plastic modular conveyor belt,900 Flat Top plastic modular conveyor belt
1100 Flush Grid plastic modular conveyor belt,1100 Flat Top plastic modular conveyor belt
OPB modular conveyor belt,OPB Flat Top plastic modular conveyor belt,OPB Flush Grid plastic modular conveyor belt,OPB Flight modular conveyor belt,
5936 Flush Grid plastic modular conveyor belt,5930 Raised Rib plastic modular conveyor belt,5935 Flat Top plastic modular conveyor belt
400 Flush Grid plastic modular conveyor belt,400 Raised Rib plastic modular conveyor belt,400 Flat Top plastic modular conveyor belt,1000 Flush Grid plastic modular conveyor belt,
1000 Raised Rib plastic modular conveyor belt,1000 Flat Top plastic modular conveyor belt
M-SNB-M2 Flat Top plastic modular conveyor belt,M-SNB-M3 Flush Grid plastic modular conveyor belt
L-SNB Flush Grid plastic modular conveyor belt,L-SNB Raised Rib plastic modular conveyor belt
4809 Raised Rib plastic modular conveyor belt
In the preserved food industry, both fish and vegetables pass through different handling and processing stages in which the belt plays a main role. We
are talking about processes like scalding, boiling, vaporization, pasteurization, etc. The belt structure must allow carrying them out in extreme work
conditions without any alteration of its physical-chemical composition, as it could have an influence on those processes.
Once the product has been canned, the cans handling will be also held on our belts, in machines for closing cans, labelling, weighing, product
accumulation, packing, palletizing, depalletizing, or conveying lines to the storeroom.
1. Warranty time: 1 year. The conveyor belt / chains / sprockets which supplied by our company could be exchanged when it have quality problems,such as it was broken in installing , the pin run out from chains or the chains parted . But if the user use it in a wrong way, we can not provide any goods for free .
2. Payment: T/T , L/C , Western Union or Paypal .
3. Lead time: 5~15 working days, subject to the order quantity.
4. Shipment: by sea, by air,door to door service for samples transportation.
5. OEM service : we have our own R.D team . If you want to purchase the belt which we have not or you have your own design , we would like to make mold for you for free , only have the condition of requiring continuous orders ,and first order must be more than 60 square meters .
Company and Productsinformationrelated:
Ningbo Rellwin IndustryCo.,ltd.