flush Grid Plastic conveyor belt
Fluio-FLO 620conveyor belts
|Belt Type||Belt Material||Working Load(max)||Belt Weight||Temp.Range||Backflex Radius(min)|
Modular belts are constructed with modules molded from thermoplastic materials connected with soild plastic rods. Except for narrow belts (one
complete module or less in width),all are built with the joints between modules staggered with those of adjacent rows in a "bricklayed" fashion. This
structure can enhance transverse strength and it is easy for maintain.
The total plastic and cleanable design can solve the steel belts easily polluted.Now the cleanable design makes the belts very suitable for food
industry area as well.Also there are be widely used in many other industries,such as container making,pharmaceutical and automotive,lines of battery and so on.
Rellwin company has a widely range of different material and structure belts. The range of Rellwin's modular belts varies from 3/8 inch small pitch
straight running belts to 2inch pitch sideflexing belts,The most commonly used belt styles inclued:
Flat Top:suitable for a wide range of products,when a fully closed belt surface is preferred.
Flush Grid:commonly used in applications where drainage or airflow is desired.
Raised Rib:recommended in applications where product stability over transfers is a concern.
Friction Top:commonly employed on incline conveyors, where the elevation of product changes.Friction Top modular belts can be used up to an angle of 20 degrees,depending on the pack style and material.
Roller Top:used in a variety of low-pressure accumulation applications.
Perforated Flat Top:used when air flow and water flow are critical but the percentage of belt open area must remain low.
Other,less frequently used belt styles may better fit your special requirements:Open Grid,Nub Top(anti-stick),Cone Top(extra grip).
This kind of modular belt can be used in following industries:
Beverage industry such as acceleration ,depalletizes and accunlation.
Food industry such as cool off lines and pack lines.
Meat industry such as tray pack line and metal detectors.
Plastic belt is the use of engineering plastics production chain plate assembly made of modular belt with interlocking brickway interleaved mode or by the total
length of the pin assembly together, this design is fundamentally improve the conveyor belt strength.Flights and side panels can also be interlocked with the
hinge pin has become integral parts of the conveyor belt. Plastic belt has too much forms, assembling flexible, easy to replace. There are openings in the form,
flat, ribs, ball, slip and other forms. Apply to pigs, sheep, chickens, ducks slaughtered , cutting and processing, puffed food production line, fruit grading, packing
lines, fish processing production line, frozen food production line, battery manufacturing, beverage manufacturing, canning industry, agro-industry, chemical industry ,
electronics, rubber and plastic manufacturing industry, the cosmetics industry, the general transport operations
Precision molding process ensures optimum flatness.
High wear resistance and low friction coefficient
High work load
The problem of space is usual in this industry. But with our FF620 belt we can stock a several-hour output, while we cool it, in a bit less than 25 square metres.
Sometimes long conveyors with product, during its processing or even already packed, will be required to go over the whole manufacturing area at a height
free of machines and obstacles. In these cases, it will be necessary a modular belt highly resistant, like our FF620 belt, which do not require any
surveillance avoiding any stop in the manufacture process.
If the disposition of the product is an essential factor to carry out its packing by means of automatic systems, our C12 belt reduces the transfer diameter to
the minimum, preventing the product from getting misplaced during the transfer or at the end of the line.
1. Warranty time: 1 year. The conveyor belt / chains / sprockets which supplied by our company could be exchanged when it have quality problems,such as it was broken in installing , the pin run out from chains or the chains parted . But if the user use it in a wrong way, we can not provide any goods for free .
2. Payment: T/T , L/C , Western Union or Paypal .
3. Lead time: 5~15 working days, subject to the order quantity.
4. Shipment: by sea, by air,door to door service for samples transportation.
5. OEM service : we have our own R.D team . If you want to purchase the belt which we have not or you have your own design , we would like to make mold for you for free , only have the condition of requiring continuous orders ,and first order must be more than 60 square meters .
Company and Productsinformationrelated:
Ningbo Rellwin IndustryCo.,ltd.