Plastic conveyor belt for food industry
Flush Grid E90 mudular conveyor belt
Sprockets for E93
Material of the belt
Material of the rod
1 TO 90
-50 to 65
-40 to 9
Bore for square shaft
• Pitch = 30 mm
• Open area = 47%
• Thickness = 16 mm
• Turning radius = 2.2 times the belt width
• Rod diameter = Ø 8 mm
E93 Flush Grid without edge tab enables all kind of turns whose minimum radius is 2.2 times the belt width.
This conveyor belt has Flush Grid
geometry, with a 47% open area, and smooth and rounded edges, which provides an excellent drainage, a very easy cleaning, good sliding properties, as
well as very low maintenance costs.
Transportation and daily maintenance of plastic conveyor belt
During storage, the product must be placed into a roll not folded, turning once during placement should be on a quarterly basis
2.Different type, size layers together using the belt should
3.Type conveyor belt, structure, size, number of layers should be a reasonable choice according to the conditions
4.Feed direction along the direction of the tape should be, in order to reduce the impact on the whereabouts of the tape should be taken when the material chute, reducing materials falling distance
Conveyor belt in use should note the following
1.Avoid roller is covered with material, resulting in ineffective rotation to prevent leakage of material between the roller and the tape card, pay attention to the lubrication of moving parts,
2.Avoid starting with a over load
Feature of Plastic modular conveyor belt
Plastic modular conveyor belt using belt injection splicing, and with supporting the drive sprocket, with no deviation drive replacement easier cleaning
characteristics.Plastic mesh belt drive module is stuck in the belt sprocket sprocket grooves are opposite the corresponding drive, so no deviation.
Plastic modular conveyor belt is easier to replace because it is wearing a matching pin assembled, it can be based on partial replacement of damaged parts,
it is unnecessary to replace the whole one , to save a certain amount of expenses.Plastic modular belt is relatively flat and smooth surface, can be directly
rinsed with water and wash with some tools.Plastic materials have arbitrarily chosen to achieve and satisfy the conditions customers, there are
food-grade plastic belt and high temperature plastic mesh and plastic mesh belt wear and rally.Is a new type of environmentally friendly technology
conveyor ideal supplies. Plastic mesh is also called plastic modular belt belt is the introduction of foreign advanced technology, using molds for injection
molding and then stitched together according to customer demand.
1. Warranty time: 1 year. The conveyor belt / chains / sprockets which supplied by our company could be exchanged when it have quality problems,such as it was broken in installing , the pin run out from chains or the chains parted . But if the user use it in a wrong way, we can not provide any goods for free .
2. Payment: T/T , L/C , Western Union or Paypal .
3. Lead time: 5~15 working days, subject to the order quantity.
4. Shipment: by sea, by air,door to door service for samples transportation.
5. OEM service : we have our own R.D team . If you want to purchase the belt which we have not or you have your own design , we would like to make mold for you for free , only have the condition of requiring continuous orders ,and first order must be more than 60 square meters .
Company and Productsinformationrelated:
Ningbo Rellwin IndustryCo.,ltd.