Standard belt widths in increments of 50 mm (2"). Non-standard widths are offered in increments of 16.66 mm
(0.66"). Smallest possible width 83.4 mm (3.25"). Non-bricklayed belts 50 mm (2") and 100 mm (4") wide.
• 0% open area
• High lateral stiffness
• Food approved materials
• Rod diameter 5 mm (0.2")
• "Open window" sprockets
• Flights and Scoops
• Hold down devices
• GripTop modules
|Belt Type||Belt Material||Working Load(max.)||Belt Weight||Temperature Range(Continuous)||Backflex Radius(min.)|
|RW-M2533||POM||18000||/||8.4||+5°to +80℃||+5°to +65℃||25|
|PP||14000||/||5.5||+5°to +104℃||+5°to +104℃|
|PE||8000||/||5.8||-40°to +65℃||-40°to +65℃|
100 Flush grid modular belts,
100 Raised rib modular belts ,
400 Raised rib modular belts,
400 Sliding roller modular belts,
500 Flush grid modular belts,
505 Flexible modular belts
800 Open grid modular belts,
800 Flat top modular belts,
900 Raised rib modular belts,
900 Friction top modular belts,
1000 Flat top modular belts,
1000 Flush grid modular belts,
1000 Raised rib modular belts,
1000 rubber-faced modular belts,
1005 Sliding roller modular belts,
1050 turning modular belts,
1060 turning modular belts,
1100 Flush grid modular belts,
1200 Raised rib modular belts,
1600 Flat top modular belts,
1700 Flush grid modular belts,
2000 Raised rib modular belts,
2200 Flexible modular belts,
2400a Flexible modular belts with flights,
2400b Flexible modular belts,
2486 Flush grid modular belts,
5705/4705 Flat top modular belts,
5706/4706 Flush grid modular belts,
4809 Raised rib modular belts,
5997 Raised rib modular belts,
7705 reinforced modular belts,
7956 Flexible flat top modular belts,
OPB Plastic modular belts,
OPB Flush grid modular belts,
Modular conveyor belts with side guards,
Modular transport belts with side guards,
Sterilization machine modular belts,
4809 modular belts,
5997 modular belts,
Flexible conveyor machine modular belts,
Film cooler modular belts,
400 sliding roller belts,
Sliding roller modular belts,
Sliding roller conveyor belts,
Teflon conveyor moduar belts with baffle and side guard,
Plastic-Steel assembling conveyor modular belts,
Assembling conveyor modular belts
Our products are widely used in general conveyance and packaging lines.
1.foods,soft drinks applications
2.packaging &can manufacturing
3.Pulses and granular products
4.Various dip tank applications
6.electronics,automobiles and logistics,etc
Modular belts are constructed with modules molded from thermoplastic materials connected with soild plastic rods. Except for narrow belts (one complete module or less in width),all are built with the joints between modules staggered with those of adjacent rows in a "bricklayed" fashion. This structure can enhance transverse strength and it is easy for maintain.
The total plastic and cleanable design can solve the steel belts easily polluted.Now the cleanable design makes the belts very suitable for food industry area as well.Also there are be widely used in many other industries,such as container making,pharmaceutical and automotive,lines of battery and so on.
Rellwin company has a widely range of different material and structure belts. The range of Rellwin's modular belts varies from 3/8 inch small pitch straight running belts to 2inch pitch sideflexing belts,The most commonly used belt styles inclued:
Flat Top:suitable for a wide range of products,when a fully closed belt surface is preferred.
Flush Grid:commonly used in applications where drainage or airflow is desired.
Raised Rib:recommended in applications where product stability over transfers is a concern.
Friction Top:commonly employed on incline conveyors, where the elevation of product changes.Friction Top modular belts can be used up to an angle of 20 degrees,depending on the pack style and material.
Roller Top:used in a variety of low-pressure accumulation applications.
Perforated Flat Top:used when air flow and water flow are critical but the percentage of belt open area must remain low.
Other,less frequently used belt styles may better fit your special requirements:Open Grid,Nub Top(anti-stick),Cone Top(extra grip).
Our services :
1. Warranty time: 1 year. The conveyor belt / chains / sprockets which supplied
by our company could be exchanged when it have quality problems,such as it
was broken in installing , the pin run out from chains or the chains parted .
But if the user use it in a wrong way, we can not provide any goods for free .
2. Payment: T/T , L/C , Western Union or Paypal
3. Lead time: 5~15 working days, subject to the order quantity.
4. Shipment: by sea, by air,door to door service for samples transportation.
5. OEM service : we have our own R.D team . If you want to purchase the belt
which we have not or you have your own design , we would like to make mold
for you for free , only have the condition of requiring continuous orders ,and
first order must be more than 60 square meters .