Roller conveyor belt in factory China
conveyor belt has been mainly designed to solve problems of conveyance of boxes containers
Sprocket series E30 CONVEYOR BELT
Material of the belt
Material of the rod
1 TO 100
-50 TO 65
1 TO 90
Bore for square shaft
SERIES E30, with a 30 mm pitch, is specially indicated for conveying and elevating small product at high speed.
The traction is made in the central part
of the modules, so that it can be used as a bi-directional belt.
Its extraordinary adaptability, combined with its great resistance, allows reaching important conveyor lengths.
Series E30 Sliding Rollers is provided with small rollers inserted on its surface that rotate around themselves whenever there is product
accumulation, avoiding crushing and wear in the base of the product.
This conveyor belt has been mainly designed to solve problems of conveyance of boxes, containers, etc.
In the beginning the modular belts were used in the production processes, but when their great profitability was proved their use was extended to the packing.
Given the modular structure of our belts and their driving by means of sprockets, their reliability is very high and makes possible the solution of every
conveyance problem by using our belts with their Rellwin accessories.So, we have helped the execution of closed circuits with belt without return, tables
of packing, automatic feeders and dispensers of boxes, vertical elevating conveyors, extendable load conveyors, etc.
The flights are plastic accessories to be inserted across the belt. They are used to push the product in ascent, descent or accompaniment applications,
avoiding that it slips along the belt.
Its non-stick side has ribs that project over the surface to prevent the product from sticking.
It is possible to cut down the standard height for special applications.
Materials: Polypropylene – Polyethylene – Polyacetal
They have been designed to be used with the Raised Rib belts in applications in which it is necessary to transfer the product by means finger plates.
The finger plates are manufactured in nylon and acetal. They have 15 teeth that hide among the projecting ribs of the belt, allowing the constant flow of
product as the belt is engaged. They avoid the use of conventional dead plates and consequently the problems by stumbling and fall of the product.
They have three fastening holes that enable little displacements to achieve a better coupling with the belt. Those holes are located so that they reduce to the
minimum the vibrations owing to the turn of the belt over the sprockets.
The finger plates can be easily installed in the structure of the conveyor putting a screw in each hole. The dimensions of these screws are: M 6 x 19 mm.
1. Warranty time: 1 year. The conveyor belt / chains / sprockets which supplied by our company could be exchanged when it have quality problems,such as it was broken in installing , the pin run out from chains or the chains parted . But if the user use it in a wrong way, we can not provide any goods for free .
2. Payment: T/T , L/C , Western Union or Paypal .
3. Lead time: 5~15 working days, subject to the order quantity.
4. Shipment: by sea, by air,door to door service for samples transportation.
5. OEM service : we have our own R.D team . If you want to purchase the belt which we have not or you have your own design , we would like to make mold for you for free , only have the condition of requiring continuous orders ,and first order must be more than 60 square meters .
Company and Productsinformationrelated:
Ningbo Rellwin IndustryCo.,ltd.